Others also read
Glassex 2007 organisers are delighted to welcome the Shanghai Northglass Technology and Industry Company to this year’s show at the NEC.
The organisers of Glassex, the UK’s leading trade event for buyers and specifiers of glass and glazing-related products, are sending out a strong message to the public sector that it is ‘more than just a plastic windows show’.
Tendency from flat to rotatable glass sputter solutions persists Over 54.000 visitors gathered information on trends and innovations in the glass industry during the international glasstec exhibition in Düsseldorf, Germany, from 24 to 28 October.
The FPS-50M3 is the largest capacity straight line vertical edger produced by SCHIATTI ANGELO Srl. This model which completes the FPS-50 series was designed to increase the performance of the older model FPS-50M2.
100% Detail is set to entice building industry professionals for the fourth year with an exhibition of innovative building design solutions.
Asahi Glass Co. net profit in the first half of this year dropped 5.4 percent from a year earlier to 42.51 billion yen due to an extraordinary loss, while overall sales rose 8.6 percent to 788.59 billion yen.
The 10th GPD conference is scheduled 15-18 June 2007. This leading forum for trendsetters and decision-makers of the glass industry has traditionally attracted an audience of some 800 and has featured some 200 professional presentations.
About 100 glass and metal companies will participate in V Fenavid - Glass and Aluminum National Fair, that will happen in September 7 to 9 at the Centro Sul Pavillon, in Florianópolis (Santa Catarina), Brazil.
Italy's glass-manufacturing industry experienced a slight recovery in 2005, glass manufacturers professional association ANFAO announced in an official statement issued today.
International trade fair for window and facade fensterbau/frontale 2006, which takes place together with Holz-Handwerk in the Exhibition Centre Nuremberg from 22-25 March 2006, has two premières to offer this year.The first one is expert discussion…
EMAP Maclaren, organiser of Glassex, has announced advanced sales for the 2006 event are well ahead of the previous event year-on-year.
GlassTech Asia, the 5th International Glass Products, Glass Manufacturing, Processing & Materials Exhibition and Conference, gave Thailands and the regions glass makers convenient access to relevant glass making technology and equipment from…
Thailand Convention and Exhibition Bureau (TCEB) together with Conference & Exhibitions Management Services Pte Ltd, Singapore Glass Association and Thai Glass Dealers Association will organise GLASSTECH ASIA 2005 for the first time in…
Without doubt a decisive factor in VITRUM 2005 being so successful for Bystronic was the fact that Bystronic, in its role as a global supplier of total solutions for the economical, application-engineered manufacture of architectural and automotive…
The public's phenomenal response at Vitrum in Milan is testimony to Edgetech's success since its launch three years ago in the greater European economic area: in EMEA, Edgetech is growing at a rapid rate.
Sevasa, amongst the leading companies of high quality satined and engraved glass, has presented its new design CriSamar® ICE at the glass international exposition Vitrum 2005, held in Milan this past October.
With the rise of shaped glass sheets in the architectural and automotive glass market, there is a decrease of glass sheets being produced in batches.
At Vitrum: Hall 15-I, Stand J04Perfect Rack Rack Management software, integrated with Perfect Cut, reduces operative time about 1-2 hours a day, and with a waste increase of only 0,5%.
Hall 15 Stand C/04Automatic CuttingThe linea 2005 wheels are produced using a particular type of hard metal obtained by means of sintering techniques applied to small dimensioned objects.
At Vitrum: Hall 15/2, Stand C 83Tubolar pull handles with lock available in a variety of diameters, manufactured in stainless steel AISI 316L.
At Vitrum: Hall 16/1, Stand C 06 - 08Dallapiccola Dario has been manufactoring racks and trolleys for glassworks since 1994, supported by his fathers 30 years experience in mechanical fabrication.
Our company Collanti Parini s.r.l. will be at Pad. 14 - B61 of Vitrum from 5th to 8th October.We'll show Vitralit® one component, UV glue for glass, Penloc® structural, two-component adhesive, special UV lamps and coloured Vitralit® for glass.
From several years on glass market, the company FORZA G ITALIA S.r.l., producer of CENTRIFUGAL SOLID/LIQUID SEPARATOR SYSTEMS, displays at its Vitrum booth H2O Global Systems that means SYSTEM OF MICRIFILTRATION that procede part of the grinding…
At Vitrum: Hall 15/2 Stand B 68LEMA Srl is the first Company in the world, manufacturer of ovens for application of glass chemical tempering process, starting in the 1972 manufacturing equipment for tempering optical and sunglasses lenses.
At Vitrum: Hall 15/I, Stand I 13-25PLC VEGAThe Schiatti Angelo company will introduce the new graphical PLC VEGA which will replace all the electronic cards CM520.