Latest news
Showing 1872 results
| Once again Edgetech will be exhibiting at this year's international glass trade fair VITRUM from 5th to 8th October in Milan.
| A test carried out by the renowned Fraunhofer Institute for Building Physics has certified sensationally good heat transfer coefficients for Edgetechs Super Spacer® and TriSeal spacers.
| For.El. Automatic SuperSpacer® Applicator applies the spacer profile SuperSpacer® in a completely automated mode all along the perimeter of panes for the production of double-glazing units.
| There has been a change in the top management at Bystronic Maschinen AG. Roland Gredig has been promoted to President.Roland Gredig took on the position from Rolf Honegger, who had previously held it in addition to his position as CEO of Bystronic…
| Armatec Vierhaus GmbH, a subsidiary of Bystronic glass, has a new president. Bernd Bedner has succeeded Ulrich Vierhaus, who retired at the end of last year.Bernd Bedner assumed responsibility for Armatec Vierhaus GmbH, located in Gunzenhausen in…
| Conventional aluminum spacer, still used in most commercial building construction, compromises thermal performance of structural glazing at a time when building energy codes are de-manding more stringent U-values in all fenestration.
| Hall 14 / Booth 14E18Bystronic is the global supplier of total solutions for the economical, application-engineered manufacture of architectural and automotive glass.
| After a successful debut at Vitrum 2003, For.El. S.p.a. welcomed partners and customers to feel the power of the New Vertical Automatic Arrissing Machine last week.
| Bystronic acquired Armatec Vierhaus GmbH, effective January 1, 2003. For Bystronic, a global supplier of system solutions for fabricating and processing of architectural and automotive glass, the aquisition of Armatec, which specializes in laminated…
| Sandglass CXP has been developed as a non transparent coating for glass. It can be used as a border on glass to hide any fixtures and fittings, replacing previously used 'fired on' coatings.
| Bystronic and Lenhardt unveiled their new joint corporate identity at Glastec 2002. An eye-catching logo and carefully matched visual environment give the Bystronic monobrand a convincing and unmistakable profile: modern and self-confident, forward-…
| During the processing of insulating glass up to 27 % and on average between 5 and 10 percent are wasted.
| At its newly designed booth at GLASSTEC 2002, Bystronic - Lenhardt will present the following new and advanced developments under production conditions:New Bystronic automotive glass processing system with glass loading robot, shape cutting,…
| The water-jet cutting market is booming with annual growth rates of 15%! One of the reasons for this brisk growth lies undoubtedly in the almost unlimited number of materials suitable for water-jet cutting.
| The leading manufacturer of machines and plants for the insulating glass and glass processing industry, LISEC AUSTRIA, boasts a complete overview of integrated software controlled fully automatic i.g. production, including cutting and spacer bending…
| TRADITION AND INNOVATION ON SHOW AT GLASSTEC 2002With their three new lines of decorative profiles developped especially for the stained glass and cathedral glass units producers, FBSPROFILATI s.r.l. confirms the constant evolution of their…
| Hall 14 Stand 14 E 063600 sq.ft. of Innovations!Fully automatic seaming of totally random-sized rectangular glass lites prior to tempering the latest FastTrack reverse-G line from Ashton Industrial with a cycle time of around 7 seconds per lite…
| Insulating warm edge spacer for IG Units, made by glass fibre reinforced polymerInsulating glass units have been manufactured so far using metal spacers, usually in Aluminium.
| In tune with an international presence, bagpipes signaled the ribbon cutting ceremony for Bystronic's new North American headquarters on May 16.
| Rohm and Haas Company is investing approximately US $20 million to build a facility in Mumbai, India.