Others also read
NEW Thermobar warm edge spacer tube has been an unprecedented success. With production levels up to full capacity within three months of its launch into the UK market, its innovators, Thermoseal Group have now purchased additional machinery to…
UK leading double glazing components supplier and warm edge manufacturer, Thermoseal Group has recently taken on a Financial Controller Matt Hambley to substantiate its continued growth.
Debut Glass in Kent is one of many of Thermoseal Group’s long-term customers now supplying all of its warm edge units with Thermobar Warm Edge Spacer to meet the market demand for ‘C’ to ‘A’ rated windows.
Andreas Geith has been appointed Managing Director of leading warm edge spacer bar supplier Swisspacer.
Pompano Beach, FL April 5, 2011 Glasslam’s First New Silicone Spacer Module Arrives Glasslam has announced the arrival of its first fully inline silicone spacer module at its Pompano Beach, FL headquarters.
Insulated glass (IG) manufacturers can now purchase aluminium, steel or Thermobar warm edge spacer bar with pre-applied PIB (Polyisobutylene) primary seal from the UK’s leading supplier of IG components, Thermoseal Group.
While participating in the warm edge silicone spacer industry for only three years, Glasslam as a manufacturer of foam spacer realized that the product and its manufacturing methods utilize 20+ year-old technologies and are far too costly and…
Guardian Industries and Infinite Edge Technologies, LLC (IET) have signed a joint development agreement to commercialize IET’s InfiSpace™ warm-edge spacer system.
January 11, 2011, Swisspacer’s sales in the UK and Ireland continued to grow at an impressive rate in 2010.
Glass and Glazing Federation (GGF) guidelines state that spacer bar can be exchanged within the scope of a registered Window Energy Rating (WER) providing it is deemed as a ‘same’ or a ‘better’ performing product.
Leading warm edge supplier Swisspacer enjoyed another successful show at Glasstec. Swisspacer’s stand had a constant stream of visitors who saw first hand the benefits of its top performing warm edge spacer bar.
Thermoseal Group, the UK’s leading supplier of double glazing sealed unit components and sealed unit manufacturing machinery, is exhibiting its new Thermobar Warm Edge Spacer bar at the G10 exhibition, Wembley Stadium 1–2 December 2010.
There is a popular misconception in the market about our products that we would like to correct. Of course it’s publicised by one of our competitors and while we don’t normally rise to the bait, we do now feel we owe it to the marketplace to provide…
Edgetech’s press release Edgetech: A Popular Misconception (Glass on Web, 0ctober 14 2010), is extremely misleading and contains false information and spin on Swisspacer and its products.
In honour of the imminent launch of Thermobar Warm Edge Spacer, Thermoseal Group has produced a comprehensive flash presentation including its guide to achieving Window Energy Ratings (WER).
If you’re looking for a warm edge spacer that is highly engineered and made with over 20 years of experience in the production of warm edge spacers, you’re looking for Thermix-TX.
The Combi-Cross Georgian Cruciform from Thermoseal Group is the cost-effective solution to meeting an array of bi-colour and single-colour Georgian requirements and allows sealed unit manufacturers to keep stock of Cruciforms to a minimum.
The G10 Regional exhibition in Belfast (Europa Hotel, 29-30 June 10) provided the first forum for Thermoseal Group to show prototypes of its new Thermobar Warm Edge spacer, as well as a place to discuss revised thermal calculations for the highly…
Leading warm edge supplier Swisspacer will be exhibiting at this year’s Glasstec exhibition in Düsseldorf (28th September – 1st October).
Bülach, 29 June 2010. The Board of Directors of Vetropack Holding Ltd has handed over the leadership of Business Division Switzerland / Austria to Johann Reiter.
Swisspacer, the leading warm edge supplier, will be showcasing the benefits of its spacer bar at GlassBuild America (Las Vegas Convention Centre, September 14-16 2010).
Thermoseal Group has signed up to exhibit at G10 Regional exhibitions in Belfast (Europa Hotel, 29-30 June 10) and London (Wembley Stadium, 1-2 December 10).
Thermoseal Group welcomes John Harrop, who has recently joined this UK leading insulated glass components supplier in a newly created post as Production Manager.
Thermoseal Group, the UK’s leading supplier of insulated glass sealed unit components and sealed unit manufacturing machinery, has invested a great deal of time and money into the training and development of employees to achieve its ‘Investors in…
Leading warm edge supplier, Thermoseal Group, attended the G09 exhibition (30 Sept – 1 Oct) to show its warm edge spacers as well as its expanding range of thermally efficient components and complementing integrated blinds.