Others also read

| New Technical Document (TD) reviews glass surface decontamination—and what makes glass ideal for physical separation and other applications.
| The use of laminated safety glass instead of single glass sheets is especially important in order to mitigate the risks of potential post-breakage behaviour and thus for the fixation of glass fragments in case of damage to the glass.
| A couple of years ago all started with the first measurement of anisotropies and edge stress as well as the detection of White Haze and other glass imperfections right after the furnace.
| The author proposes a simple surface quality test using a standard window cleaning scraper and common smartphone or shop microscope.
| This blog post was written based on an interview with M.Sc. (Chem.) Santtu Jolkkonen, Sparklike's Service and Maintenance Manager, who has been working as technical support specialist for Sparklike over a decade.
| In some cases, the blemished glass can be restored to an acceptable aesthetic condition using a combination of wet and dry polishing methods.
| Multiple glass options offer customized ways to suit different building needs.
| Asahi Glass Company (AGC), a world-leading manufacturer of glass, chemicals and high-tech materials, announces that it has become an official sponsor of the Japan Pavilion at the EXPO Milano 2015.
| In the last few years, the production of insulating glazing units (IGU) evolved to develop composi-tions to obtain high thermal insulation performance: double glazing filled with Argon/Kripton gas, low-emission glazing, warm-edge spacers and triple glazing.
| Differently from traditional structural materials, the structural behaviour of laminated glasses exhibits some anomalies due to the difference in the stressstrain laws of their components: glass is a brittle material, while PVB and SGP are thermoplastic materials with a visco-elastic behaviour.
| Contact angle measurements using method based on B-spline snakes (active contours) were applied to investigate surface wettability properties of commercial soda-lime-silica float glass subjected to various surface preparation methods.
| Breakage patterns, residual stress, and fractured surfaces on tempered glasses are investigated to find the correlation among glass thickness, tempered level, and the number of fragments, particularly when the glass thickness is less than 4 mm.
| Will glass break if window film is installed to glazing?
| Glass industry standards in different countries require 24/7 quality control with the same specifications and fully automated analyses and following statistics.
| Glass is the dominant building material in modern architecture.
| While glass manufacturers have little control over raw material costs or finished product orders, process control is one area where even minor improvements can trim production costs, improve product quality, and ultimately increase profits.
| To celebrate the 225th anniversary of Italys famous Nardini Distilleries, the Nardini family - who still owns and runs the company - treated themselves to an architectural work of art, erecting a stunning glass creation designed by Massimiliano Fuksas and Doriana O. Mandrelli.