Talamoni Will Be Present at Vitrum with Some Innovations

Further features of these wheels include rectifying of the hole, thickness and sharpening using diamond drills studied and personalized by the company, carried out with reduced tolerances and specifics for the supports in plastic and in metal. The application of roller carried out with accurate controls and using stainless steel and hard metal axes produced in-house as all the other roller holders.
On the occasion of Vitrum, the company will be presenting its new wheels in hard metal.
Wheel 4522 differs for its dimensions and material and enables to carry out open cuts on has been created to be installed on most of the cutting tables present on today’s market.

Manual cutting tools include a complete range of dry and oil glass cutters.

The dry glass cutters with ergonomic handle in wood are produced both with rosette with six stained steel rollers and one roller in hard metal
The oil glass cutter can be equipped with a plastic handle with the company logo or in metal wide or narrow cutting head for thickness 0,8-8 mm the complete series of glass cutters is created with care and attention to satisfy a wide range of operators.

Innovations:

Particolar supports suitables for all types of circular cutters, with rosette abd special cutting heads for improved manual open cutting.

Cutting oil

The range of cutting oils supplied by Talamoni has been enlarged with two new formulations that have been created to satisfied the different demands, However the entire range enables the containment of completely evaporable-semi evaporable-and low volatility micro chipping that take place during cutting processes.

Tools

A series of articles for glass processing completes the exhibited product range, other than line of diamond tools.

Talamoni Tomasino and staff will be present at the stand to speack to clients also with demonstrations of glass cutting, and so on.