Others also read
“We’re Going” says Thermoseal Group, who is set to join the exhibitors on 16-18 April at the FIT Show 2013, Telford International Exhibition Centre - stand number 1-06 in Hall 1.
From the manufacturer of Thermobar Warm Edge Spacer Tube and Accessories, Thermoseal Group is to introduce its new product at Glasstec Dusseldorf 23–26 October 2012 - Thermoflex Warm Edge Spacer.
The BFRC’s recently revised chart of approved spacer bar conductivity values has awarded Thermobar Warm Edge Spacer Tube with an even lower value of 0.16W/mK¹ with or without its gas barrier tape.
Thermobar, the UK’s Highest Performance Spacer Tube is to be showcased at Glass Build America in Las Vegas between 12 – 14 September 2012 by manufacturer and leading UK component supplier, Thermoseal Group.
With the rising demand for narrower spacer tubes for triple glazed units, leading UK Component Supplier Thermoseal Group has introduced two new sizes to its Thermobar warm edge spacer range - 7.5mm and 9.5mm.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
Perma Led adhesive Lead strip, having been manufactured for over 30 years has now been rebranded to fit in with Thermoseal Group’s own-manufactured product range.
Spurred by customer demand, Thermoseal Group - manufacturer of Thermobar warm edge spacer tube and supplier of IG components and glass machinery - now offers to bend Thermobar into curves and arches.
UK leading double glazing components supplier and warm edge manufacturer, Thermoseal Group has recently taken on a Financial Controller Matt Hambley to substantiate its continued growth.
Debut Glass in Kent is one of many of Thermoseal Group’s long-term customers now supplying all of its warm edge units with Thermobar Warm Edge Spacer to meet the market demand for ‘C’ to ‘A’ rated windows.
Pompano Beach, FL April 5, 2011 Glasslam’s First New Silicone Spacer Module Arrives Glasslam has announced the arrival of its first fully inline silicone spacer module at its Pompano Beach, FL headquarters.
Insulated glass (IG) manufacturers can now purchase aluminium, steel or Thermobar warm edge spacer bar with pre-applied PIB (Polyisobutylene) primary seal from the UK’s leading supplier of IG components, Thermoseal Group.
Glass and Glazing Federation (GGF) guidelines state that spacer bar can be exchanged within the scope of a registered Window Energy Rating (WER) providing it is deemed as a ‘same’ or a ‘better’ performing product.
Leading warm edge supplier Swisspacer enjoyed another successful show at Glasstec. Swisspacer’s stand had a constant stream of visitors who saw first hand the benefits of its top performing warm edge spacer bar.
Thermoseal Group, the UK’s leading supplier of double glazing sealed unit components and sealed unit manufacturing machinery, is exhibiting its new Thermobar Warm Edge Spacer bar at the G10 exhibition, Wembley Stadium 1–2 December 2010.
Edgetech’s press release Edgetech: A Popular Misconception (Glass on Web, 0ctober 14 2010), is extremely misleading and contains false information and spin on Swisspacer and its products.
In honour of the imminent launch of Thermobar Warm Edge Spacer, Thermoseal Group has produced a comprehensive flash presentation including its guide to achieving Window Energy Ratings (WER).
If you’re looking for a warm edge spacer that is highly engineered and made with over 20 years of experience in the production of warm edge spacers, you’re looking for Thermix-TX.
The Combi-Cross Georgian Cruciform from Thermoseal Group is the cost-effective solution to meeting an array of bi-colour and single-colour Georgian requirements and allows sealed unit manufacturers to keep stock of Cruciforms to a minimum.
The G10 Regional exhibition in Belfast (Europa Hotel, 29-30 June 10) provided the first forum for Thermoseal Group to show prototypes of its new Thermobar Warm Edge spacer, as well as a place to discuss revised thermal calculations for the highly…
Thermoseal Group has signed up to exhibit at G10 Regional exhibitions in Belfast (Europa Hotel, 29-30 June 10) and London (Wembley Stadium, 1-2 December 10).
Thermoseal Group welcomes John Harrop, who has recently joined this UK leading insulated glass components supplier in a newly created post as Production Manager.
Thermoseal Group, the UK’s leading supplier of insulated glass sealed unit components and sealed unit manufacturing machinery, has invested a great deal of time and money into the training and development of employees to achieve its ‘Investors in…
Leading warm edge supplier, Thermoseal Group, attended the G09 exhibition (30 Sept – 1 Oct) to show its warm edge spacers as well as its expanding range of thermally efficient components and complementing integrated blinds.
In the interests of representing its customer base of over one thousand sealed unit manufacturers across the UK, Thermoseal Group has become one of the most recent members of the Glass and Glazing Federation.