Others also read
The BFRC’s recently revised chart of approved spacer bar conductivity values has awarded Thermobar Warm Edge Spacer Tube with an even lower value of 0.16W/mK¹ with or without its gas barrier tape.
Thermobar, the UK’s Highest Performance Spacer Tube is to be showcased at Glass Build America in Las Vegas between 12 – 14 September 2012 by manufacturer and leading UK component supplier, Thermoseal Group.
Quanex Building Products announced today that it will exhibit at Fenestration Australia 2012, August 13-15, in Fremantle, Western Australia, Booth #26.
Invitation Developed by industry experts in their field, IGMA is pleased to present the IGMA Educational Seminar for the benefit of continuing education for the industry.
ODL Europe, specialists in insulated glass and injection molded glazing cassettes for the composite door market, have taken up the opportunity to exhibit at the FIT Show in the hope of reaching new customers.
Architectural aluminium systems specialist, Technal, has announced new thermal performance data for its FXi65 casement window system, which exceed Building Regulations requirements.The new figures demonstrate that even with a 24mm double glazed unit…
Kolbe’s Ultra Series Folding Window supports architects in designing open spaces with expansive views, fresh air and natural light.
Visitors to the sell-out launch of the new Barnes Foundation building in Philadelphia PA will enter beneath a stunning canopy of Pilkington glass.
The course organized by the Fenzi group and entitled: Selecting Insulating Glass Sealants for Durability and Energy Efficiency – is now available from the AEC Daily’s Online Learning Center (OLC) website.
One of Birmingham’s most prominent Grade A office buildings is undergoing a major window replacement project.
With the rising demand for narrower spacer tubes for triple glazed units, leading UK Component Supplier Thermoseal Group has introduced two new sizes to its Thermobar warm edge spacer range - 7.5mm and 9.5mm.
The manufacturing site inaugurated by the Glass Alliance network two years ago at Lipetsk, near Moscow, is running at full capacity.
As one of the most promising markets in South America for sure Brazil is in the focus of the glass industry and its machinery manufacturers.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
If further proof was needed of the thermal insulation and physical qualities of Wicona’s aluminium windows and doors, this is it.
Thermoseal Group is to showcase its warm edge range of products including Thermobar and its wide range of compatible components at the Glasstec exhibition in Dusseldorf – 23–26 October 2012.
May 16 - 19, 2012At Glass South America 2012 Bystronic glass will inform about its innovative system solutions for modern glass processing and shows equipment for glass handling.
Advanced solar control glass for Single Glazing ApplicationSGG Evo is a solar control glass that is energy efficient and has thermal insulation properties in a single glazing application.
SCHOTT supplies restoration glass for the Palace of Tears in BerlinMainz, May 02, 2012 – Special glass from SCHOTT gives the Palace of Tears at the Friedrichstraße train station in Berlin that is listed as a historic building a glass façade that…
The renowned window manufacturer Internorm uses Lisec Systems to increase its already extensive manufacturing capabilities.
Mark Hickox, Sales Director at Thermoseal Group, manufacturer of Thermobar warm edge spacer clarifies the method for exchanging warm edge spacer within current Window Energy Rating (WER) simulations and also the facts and figures that have been…
Perma Led adhesive Lead strip, having been manufactured for over 30 years has now been rebranded to fit in with Thermoseal Group’s own-manufactured product range.
NEW Thermobar warm edge spacer tube has been an unprecedented success. With production levels up to full capacity within three months of its launch into the UK market, its innovators, Thermoseal Group have now purchased additional machinery to…
In response to customer demand, New Irish Oak Georgian bar and bespoke cruciform fittings have been developed by Thermoseal Group in popular sizes 18x8mm and 25x8mm.
The Combi-Cross Georgian Cruciform from Thermoseal Group is the cost-effective solution to meeting an array of bi-colour and single-colour Georgian requirements, and allows sealed unit manufacturers to keep stock of Cruciforms to a minimum.