Others also read
Prism Architectural are delighted to announce that they have been selected by Vinci Construction to deliver the £3.8M external envelope for The Illumina Building, Granta Park, Cambridge.
When adding a modern extension to a beloved historic building, creating a sensitive link between the two is an important consideration.
With the help of Ensinger’s warm-edge spacers, the Canadian insulating glass manufacturer Prelco created a unique crystal coat for Ryerson University’s Student Learning Centre.
Flanagan and Lawrence has transformed an office block built in 1975 into a cutting-edge, modern building with the help of a triple-height structurally glazed atrium.
A vital transport link to east London, the Stratford International Extension Project was constructed to act as a catalyst for regeneration in the Lower Lea Valley, which previously had limited transport options.
Bürkert Fluid Control Systems – Huntersville, North Carolina
The Capitol, designed by award winning architects Wilson Architecture is a fifty million euro development by John Cleary Developments.
Engineering firm ABT recently realised a slender surrealist staircase of concrete and glass for its own headquarters in Velp, the Netherlands.
Each of the almost one hundred corners was different, the facade was also slightly curved and there wasn’t a right angle in sight.
W&W is currently supplying the proper glasses and metals to crisply reflect the surroundings, and providing high-quality aluminum curtain wall systems to ensure the building will last for generations to come.
BWBR Architects designed the 4-story, 130,000–square-foot HealthPartners Neuroscience Center, located in St. Paul, MN, creating a structure that allows as much natural sunlight into the building as possible.
Glazing Vision’s Flushglaze fixed and circular rooflights were installed within a fortress-like home, located on the shore of St Ouen’s Bay in West Jersey.
Experts from Dow Corning will highlight High-Performance Building Solutions in booth 3403 at the 2017 AIA Conference, April 27-29 in Orlando.
Elegance 72 is a unitised curtain walling system that brings together the benefits of factory production control and speed of installation on site.
The final product was SentryGlas laminated mirror and satin glass which then had brilliant cut grooves and sandblasted darker strips.
TriPyramid Structures, Inc. was commissioned by W&W to design, engineer, and fabricate each of the custom bronze patch fittings.
One of the unique touches on the campus design was the use of a specialized, cable tension-supported jewel-box glass design for the facade of the main retail branch at the front of the premises.
A successful premiere marked the beginning of a sold out season at Denmark’s first newly built theatre in over a century outside of the Danish capital Copenhagen.
ToughGlaze received orders to manufacture over 3,000m² to provide the entire balustrade for the redeveloped Kings Cross interchange and links to St. Pancras Station.
Glass & Mirror Craft fabricated a point-supported low-iron glass curtain wall for maximum transparency that also eliminated as many fittings as possible.
2000 linear meters of GlassFit railings on the spectacular Ryad Al Andalous Complex in Rabat.
A 250 square meters insulation glazing facade has been implemented for the entrance's construction of an office building near Paris.
Dichroic Laminated Glass is a unique product that transmits and reflects light, producing a brilliant color shift when viewed at different angles.
W&W Glass was chosen to make the project come to life based on their extensive experience in bespoke cable tension wall design, engineering, and installation.
Bright, spacious interiors that are also quiet, comfortable in temperature and efficient to heat.