Others also read
The course organized by the Fenzi group and entitled: Selecting Insulating Glass Sealants for Durability and Energy Efficiency – is now available from the AEC Daily’s Online Learning Center (OLC) website.
One of Birmingham’s most prominent Grade A office buildings is undergoing a major window replacement project.
The manufacturing site inaugurated by the Glass Alliance network two years ago at Lipetsk, near Moscow, is running at full capacity.
As one of the most promising markets in South America for sure Brazil is in the focus of the glass industry and its machinery manufacturers.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
If further proof was needed of the thermal insulation and physical qualities of Wicona’s aluminium windows and doors, this is it.
Thermoseal Group is to showcase its warm edge range of products including Thermobar and its wide range of compatible components at the Glasstec exhibition in Dusseldorf – 23–26 October 2012.
Recently, the Bengbu Glass Industry Design and Research Institute Holdings subsidiary, Chengdu Optoelectronics Technology Co., Ltd. production of the first ultra-thin 0.5mm the arsenic TFT-LCD glass substrate products passed the domestic core users…
May 16 - 19, 2012At Glass South America 2012 Bystronic glass will inform about its innovative system solutions for modern glass processing and shows equipment for glass handling.
Advanced solar control glass for Single Glazing ApplicationSGG Evo is a solar control glass that is energy efficient and has thermal insulation properties in a single glazing application.
SCHOTT supplies restoration glass for the Palace of Tears in BerlinMainz, May 02, 2012 – Special glass from SCHOTT gives the Palace of Tears at the Friedrichstraße train station in Berlin that is listed as a historic building a glass façade that…
The renowned window manufacturer Internorm uses Lisec Systems to increase its already extensive manufacturing capabilities.
Mark Hickox, Sales Director at Thermoseal Group, manufacturer of Thermobar warm edge spacer clarifies the method for exchanging warm edge spacer within current Window Energy Rating (WER) simulations and also the facts and figures that have been…
The national Window and Door Manufacturers Association (WDMA) announced Mike Salsieder, president and general counsel of Kolbe & Kolbe Millwork Company, Inc. , has been elected as Vice Chairman of the Window Division and will continue to serve…
The Lead Exposure Reduction Amendments Act of 2012 (S2148), introduced by Sen. James Inhofe (R-OK), seeks to restore the "Opt-Out" provision removed from the Environmental Protection Agency's (EPA) Lead Renovate, Repair and Painting (…
DUBLIN--(BUSINESS WIRE)--Research and Markets (http://www.researchandmarkets.com/research/7cdee5/sealed_units_volu) has announced the addition of the "Sealed Units: Volumes and values for the Sealed Unit Market in the UK 2008-2014" report…
Spurred by customer demand, Thermoseal Group - manufacturer of Thermobar warm edge spacer tube and supplier of IG components and glass machinery - now offers to bend Thermobar into curves and arches.
Developed for rigorous bonding and sealing in demanding manufacturing applications, Master Bond EP3HTSMED epoxy system features a rapid cure schedule and a tensile shear strength exceeding 1,000 psi.
New product helps building owners cost-effectively retrofit aging commercial buildingsPedricktown, N.
An East Yorkshire glass factory has announced a £30m investment in energy-saving glass manufacturing that will create 50 jobs.
Online Auction Closing 12 NoonThursday 15th December 2011A C Yule & Son Limited Sale 2 of 4By order of B C Nimmo and G S Fraser, KPMG LLP, Joint Administrators of A C Yule & Son LimitedDouble Glazed Sealed Unit Production Lines, Tamglass…
Photovoltaic Technology company Polysolar has opened a new research and development office at the Printed Electronics Technology Centre (PETEC) in the UK.
Polysolar says it plans to build a full scale production plant for its transparent photovoltaic glazing in the UK within the next two years.
In response to customer demand, New Irish Oak Georgian bar and bespoke cruciform fittings have been developed by Thermoseal Group in popular sizes 18x8mm and 25x8mm.
Kolbe expanded its library of 2-D models and 3-D building information modeling (BIM) tools to include Ultra Series Beveled Direct Set windows.