Others also read
Invitation Developed by industry experts in their field, IGMA is pleased to present the IGMA Educational Seminar for the benefit of continuing education for the industry.
ODL Europe, specialists in insulated glass and injection molded glazing cassettes for the composite door market, have taken up the opportunity to exhibit at the FIT Show in the hope of reaching new customers.
HOUSTON, July 31, 2012 (NYSE:NX) – Quanex Building Products announced today that it will exhibit at Glasstec 2012, October 23-26, in Düsseldorf, Germany, Stand C77 in HALL 17.
Master Bond Supreme 10HT is a uniquely versatile system that combines high shear and peel strengths with convenient handling.
Architectural aluminium systems specialist, Technal, has announced new thermal performance data for its FXi65 casement window system, which exceed Building Regulations requirements.The new figures demonstrate that even with a 24mm double glazed unit…
Kolbe’s Ultra Series Folding Window supports architects in designing open spaces with expansive views, fresh air and natural light.
Visitors to the sell-out launch of the new Barnes Foundation building in Philadelphia PA will enter beneath a stunning canopy of Pilkington glass.
The course organized by the Fenzi group and entitled: Selecting Insulating Glass Sealants for Durability and Energy Efficiency – is now available from the AEC Daily’s Online Learning Center (OLC) website.
Formulated for electrical potting and encapsulation applications, Master Bond EP36AO combines high thermal conductivity with thermal stability.
One of Birmingham’s most prominent Grade A office buildings is undergoing a major window replacement project.
With the rising demand for narrower spacer tubes for triple glazed units, leading UK Component Supplier Thermoseal Group has introduced two new sizes to its Thermobar warm edge spacer range - 7.5mm and 9.5mm.
The manufacturing site inaugurated by the Glass Alliance network two years ago at Lipetsk, near Moscow, is running at full capacity.
As one of the most promising markets in South America for sure Brazil is in the focus of the glass industry and its machinery manufacturers.
Due to the success of Thermobar warm edge spacer tube and the increasing number of orders for insulated glass components, Thermoseal Group has increased its fleet with the addition of 7½ tonne,12 tonne and 18 tonne trucks to maximise delivery…
If further proof was needed of the thermal insulation and physical qualities of Wicona’s aluminium windows and doors, this is it.
Thermoseal Group is to showcase its warm edge range of products including Thermobar and its wide range of compatible components at the Glasstec exhibition in Dusseldorf – 23–26 October 2012.
May 16 - 19, 2012At Glass South America 2012 Bystronic glass will inform about its innovative system solutions for modern glass processing and shows equipment for glass handling.
Advanced solar control glass for Single Glazing ApplicationSGG Evo is a solar control glass that is energy efficient and has thermal insulation properties in a single glazing application.
Master Bond elastomer system, EP30D-10, offers the strength, flexibility, performance, and adhesive qualities traditionally associated with epoxies, along with the toughness and abrasion resistance of polyurethanes.
SCHOTT supplies restoration glass for the Palace of Tears in BerlinMainz, May 02, 2012 – Special glass from SCHOTT gives the Palace of Tears at the Friedrichstraße train station in Berlin that is listed as a historic building a glass façade that…
The renowned window manufacturer Internorm uses Lisec Systems to increase its already extensive manufacturing capabilities.
Mark Hickox, Sales Director at Thermoseal Group, manufacturer of Thermobar warm edge spacer clarifies the method for exchanging warm edge spacer within current Window Energy Rating (WER) simulations and also the facts and figures that have been…
Perma Led adhesive Lead strip, having been manufactured for over 30 years has now been rebranded to fit in with Thermoseal Group’s own-manufactured product range.
Spurred by customer demand, Thermoseal Group - manufacturer of Thermobar warm edge spacer tube and supplier of IG components and glass machinery - now offers to bend Thermobar into curves and arches.