Others also read
Tak Metal has become new partner of Albat+Wirsam Software AG in Turkey.
With the arrival of CE marking of IGUs (EN1279) on March 1st, it has been agreed that thermally insulating glass units should now state U-values with 90% argon-gas filling.
When purchasing Harvey replacement windows there are many different options for energy efficiency. As most people know, you get better performance from insulated glass than from single pane windows.
Double glazing firm St Helens Glass is believed to have collapsed with the loss of more than 200 jobs. It is estimated that figure could rise to more than 300 if salespeople, fitters and drivers contracted by the firm are also taken into account.
Guardian Building Products Distribution, Inc., announces its newest product with the introduction of GuardWrap™.
Saint-Gobain Isover is to build a new, 70,000-ton capacity glass wool plant in Chemillé, (Maine-et-Loire) France. The plant is due to begin production at the end of 2008, will create approximately 150 jobs.
In the context of CE Marking, most flat glass products sold in the European Union must now conform to European technical standards known as harmonised European Norms (hEN), as dictated by the Comité Européen de Normalisation (CEN).
The Raytek GS110 process imaging system for low emissivity (low-E) glass was specifically designed to monitor one-side coated flat glass and addresses a rapidly increasing need as low-E glass becomes more widely used in the construction industry.
Receiving the Insulating Glass Certification Council's highest certification for its Comfort-Gard Plus(R) glass technology, Patio Enclosures, Inc. has become the only sunroom manufacturer to attain this distinction for the commercial and…
With proper, detailed planning, a new conservatory can add value to your property and enhance your living accommodation.
Hot Melt Technologies introduced the Benchmark 615 Hot Melt system that can be used with high-viscosity butyls, sealants and mastics for insulating glass window manufacturing, fabrication of door lites and solar panels, and sealing of metal roof…
UP-616 is a two-component, room-temperature-cured high performance polysulfide sealant. It also has excellent maneuverability, curing property and quality consistency.
Kommerling UK, leading manufacturer and supplier of sealants and resins is launching a number of new products into the IG and glazing market.
The FPS-50M3 is the largest capacity straight line vertical edger produced by SCHIATTI ANGELO Srl. This model which completes the FPS-50 series was designed to increase the performance of the older model FPS-50M2.
Düsseldorf 1996-2006: 10 years have passed since the first Vertical Cutting Line for Stratified Glass Panes was exhibited to the world; at the time, it was welcomed with amazement and surprise and it was immediately noticed by the best glassworks,…
Inspired by the port The Law Courts, located on the southern edge of Antwerp, cover a surface area of 78,000 m² and features six levels: one underground and five above ground, the highest of which is just 15.75 m off the ground.
DuPont Glass Laminating Solutions has introduced DuPont Spallshield® , the business' first generation plastic composite product for use in vehicle sunroofs.
Improved thermal insulation, lower total energy transmittance, and better handling: Interpane revealed optimized glass technology at the fensterbau.
The first "Architektur Fenster Fassade" innovation prize has been awarded at the fensterbau/frontale 2006 in Nuremberg by the architecture journals xia IntelligenteArchitektur and AIT in cooperation with NürnbergMesse GmbH.
Diamon-Fusion International, Inc. (DFI), global developer and exclusive supplier of the Diamon-Fusion® patented nanotechnology, is proud to announce that ALCOA has been the recipient of The Best of 05 by the USGlass Magazine 2005 Product of the…
On March 27, 2006, H.B. Fuller Company (NYSE:FUL) announced that it has entered into an asset purchase agreement with Henkel KGaA under which H.B.
H.B. Fuller Co. stated that it reached asset purchase deal with Henkel KgaA, wherein the former company would buy the insulating glass sealant business of the latter company.
Italy's glass-manufacturing industry experienced a slight recovery in 2005, glass manufacturers professional association ANFAO announced in an official statement issued today.
After only a six month construction phase Bystronic-Lenhardt Technology has has officially opened a new Training Centre in the southern German town of Neuhausen-Hamberg.
FOR.EL. never falls short in regards to proposing new machinery. The new products are interesting, innovative and high-tech.