Others also read
This tipe of drilling machine enables the operator to drill holes in glass sheets at least 2mm thick up to a maximum thickness of 28mm.
Diamon-Fusion International (DFI) reached a licensing agreement with Italian glass manufacturer Curvet Spa (Gruppo Industriale Curvet).
With its 1999 goal of sales expansion outside Europe, Saint-Gobain Technical Fabrics set up a fabric cutting unit in Mexico for grinding wheels, in November 2001.
As of December 31, 2001 Mr. Karl Lenhardt has resigned his responsibilities as Managing Director of Lenhardt Maschinenbau GmbH in Neuhausen-Hamberg.
In 1997, Thailand legislated the use of laminated glass for facades in buildings over 23 m in height, when the total internal area is over 10,000 m2, or if the building is over 15 m in height and the total internal area is greater than 1,000 m2.
Demand for flat glass in the United States is forecast to rise three percent per year to almost seven billion square feet in 2005, valued at $9.1 billion.
Italian manufacturer of glass working machines For.El., presents the semi-automatic machine for concurrent two-side symmetric sealing with butyl rubber of spacer frames for double-glazing.
Recently a major success for FBSprofilati was the launch of the latest addition to its range of Georgian bars FB 2051.
This year Lenhardt presented for the first time at Vitrum the world renowned, most advanced and flexible insulating glass production system - the TPS -Line.
Numerical control machine type Concept to grind and polish the edge on shaped glasses with internal curves, external curves, straight-line sides as well as mitered corners.
VT 1601 CN is a vertical driller with opposite heads, characterised by a drilling range of 1600 x 2600 mm.
Elettromeccanica Bovone has presented the following machines at Vitrum 2001:Double-Edger line B 24For flat edge, composed by: 1st double-edger 1600 mm., roller transfer table, 2nd double-edger 3000 mm; automatic wearing compensation for resin and…
The P&C clothes store in the German city of Dsseldorf is one of the largest projects ever taken on by Tambest.
Blowing, pressing, staining, cutting - over thousands of years Man has developed a wealth of techniques to increase the attractiveness and functionality of glass.
At Vitrum 2001 Baudin Janbac Groupe will demonstrate:- Vertical edger Baudin Type 681 E (last generation). This machine will be exhibited with all options.