Others also read
With Glasstec now firmly on the horizon, The Glass Machinery Company is focusing on the new product developments to be introduced at the exhibition by suppliers.
The Glass Machinery Company has seen positive trading results during the first quarter which senior management attribute to the high calibre standards of the products within the range.
The top third and bottom third of the glass has been protected with Enduro Shield Glass Coating, the middle section has not. Muddy water has then been poured over the glass.
Leading glass processing equipment provider The Glass Machinery Company has recently invested over 5,000 Euros in Fratelli Pezza spares.
The installation of a Hegla cutting solution at leading glass manufacturers, Village Glass will have a major impact on the architectural market that will set a new benchmark for the industry.
A new creative approach in advertising has been undertaken by Lattuada, a company founded in 1978 at Carbonate (province of Como), which specializes in the design and manufacture of glass processing machinery.
The Glass Machinery Company Ltd is quickly establishing itself as one of the UK’s most dependable suppliers of quality equipment to the glass and stone industries.
EnduroShield provides a glass scratch removal service to remove glass scratches, mineral deposits or soap scum build up from glass surfaces.
The straight-line edging machines have always represented the core-business of our company, bringing us to develop a range which is now the widest on the market.
We supply many different types of each glass drilling machine and shown below, GHD-H Horizontal Double Spindles Glass Holes Drilling Machines Drill A Hole In Seconds Free Of BurrGHD-H is used to drill holes on flat glass by means of core drilling…
Glass world 2010, the 4th International Exhibition for glass products and glass technology, will return back to Cairo International Convention Centre (CICC) during 05-07 May, 2010 in Egypt.
For.El. continuous promoting the innovation in the composition of the insulating glass, sustaining and developing the performances of the double glazed panel; by now undisputed protagonist of the contemporary construction building that asserts its…
Pavilion: 22P - Booth: G01-K02 We will bring to the fair one of our “lead model” of straight-line edging machine for the flat edge with arris and variable angle: the TLR 16 AV C.
We will bring to the fair one of our “lead model” of straight-line edging machine for the flat edge with arris and variable angle: the TLR 13 AV C.
"I want to build machines" With this statement, in 1978 Adelio Lattuada started his path and after 30 years of development, we are proud to say that the evolution has been uninterrupted and accomplished through the achievement of many…
Since the beginning of our activity we have always been giving importance to all possible communication instruments we could use in order to keep a constant touch with our sector.
Our booth (F22 - Pavilion 16) at the Glasstec fair will be particularly rich in novelties and “curiosities” this year.The first ones concern both new products and technological innovations applied to the already existing models.
The FPS-50M3 is the largest capacity straight line vertical edger produced by SCHIATTI ANGELO Srl. This model which completes the FPS-50 series was designed to increase the performance of the older model FPS-50M2.
Since the beginning of our activity we have always been giving importance to all possible communication instruments we could use in order to keep a constant touch with our sector.
Our booth (F22 - Pavilion 16) at the Glasstec fair will be particularly rich in novelties and “curios” this year.
Adelio Lattuada has presented a new model at Vitrum 2005: the A.L. 7 E Cerio, an electronic straight-line edging machine for the processing of flat edge with arris, polished by liquid cerium oxide.
Booth: D24-E25 / Pavilion: 15/1Our commercial and technical staff will be glad to introduce you, at the 2005 edition of Vitrum in Milan, some of the models of our wide range of proposals.
Booth: D24-E25 / Pavilion: 15/1At the 2005 edition of an unmissable showcase like Vitrum we will present some of the most interesting models of our wide and valued range of proposals.
Completely new series in the spirit of One-Stop-Partner: Integrated horizontal double edging and drilling process line all in one: loading, grinding, drilling, milling and countersinkingThe new horizontal process solution is available as one…
Bovone company is one of the world leading supplier of flat glass processing machines for the furniture, automotive and architectural industry.