Others also read
Welcome to the January issue of Glass International. This issue features a host of exclusives with some of the biggest names in the industry.
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 312, “Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles.
The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems, which provides a guide to manufacturers, architects, specifiers,…
Folienwerk Wolfen, the high quality plastic film provider for PET, PC and PLA bases with a 20 year heritage is pleased to announce a partnership with RegaLead to supply its pioneering evguard® series of lamination films to the UK glass processing…
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The Group’s Managing Director, Gwain Paterson comments: “Sponsoring the G-Awards champagne reception is our contribution to what has always been a great evening." “We were one of the earliest sponsors of the event and enjoy seeing its…
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
The Society of Glass Technology’s Annual Conference will this year be held at the University of Durham, UK, on 10th-12th September.
IQ Glass - Sliding Doors meeting Glass FloorAs the UK’s leading architectural glazing company IQ Glass are often the first to see any emerging trends in residential architecture including materials used, building methods and design aspects.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
The British Glass Manufacturers’ Confederation has launched its ‘Women in Manufacturing’ (WiM) initiative to encourage more women to build careers in engineering and manufacturing.
Leading double glazing installer Sheffield Window Centre is heading for further expansion after acquiring glass manufacturer Central Glass.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
The NSG Group has informed employee representatives in its European Architectural Glass business of its intention to mothball one of the two float lines currently in operation in the UK as set out below. 1.
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
Having recently set up a growing UK manufacturing facility, the largest specialist insulated glass component manufacturer and distributor in the UK is a finalist for the Component Supplier of the Year Award in the up and coming G13 Awards.
Premier glass door company is recognized by Glass Magazine for producing the most innovative bath enclosure. Wilson Glass is proud to announce that they have been awarded by Glass Magazine with the Most Innovative Bath Enclosure Project Award.
Prince William and the Duchess of Cambridge will be able to enjoy the big Norfolk skies from their country retreat.