Others also read
With the arrival of CE marking of IGUs (EN1279) on March 1st, it has been agreed that thermally insulating glass units should now state U-values with 90% argon-gas filling.
Health and safety in the workplace is a vital issue for the manufacturing industry but the new developments in crane design means manufacturers are not only looking at cranes as a safety device but also as a way of increasing productivity.
When purchasing Harvey replacement windows there are many different options for energy efficiency. As most people know, you get better performance from insulated glass than from single pane windows.
Double glazing firm St Helens Glass is believed to have collapsed with the loss of more than 200 jobs. It is estimated that figure could rise to more than 300 if salespeople, fitters and drivers contracted by the firm are also taken into account.
Materials Technology Publications and the Abrasive Engineering Society announce publication of The Abrasives Industry in Europe and North America, fifth edition completely up-dated and expanded.
Guardian Building Products Distribution, Inc., announces its newest product with the introduction of GuardWrap™.
Saint-Gobain Isover is to build a new, 70,000-ton capacity glass wool plant in Chemillé, (Maine-et-Loire) France. The plant is due to begin production at the end of 2008, will create approximately 150 jobs.
In the context of CE Marking, most flat glass products sold in the European Union must now conform to European technical standards known as harmonised European Norms (hEN), as dictated by the Comité Européen de Normalisation (CEN).
The Raytek GS110 process imaging system for low emissivity (low-E) glass was specifically designed to monitor one-side coated flat glass and addresses a rapidly increasing need as low-E glass becomes more widely used in the construction industry.
Receiving the Insulating Glass Certification Council's highest certification for its Comfort-Gard Plus(R) glass technology, Patio Enclosures, Inc. has become the only sunroom manufacturer to attain this distinction for the commercial and…
With proper, detailed planning, a new conservatory can add value to your property and enhance your living accommodation.
Hot Melt Technologies introduced the Benchmark 615 Hot Melt system that can be used with high-viscosity butyls, sealants and mastics for insulating glass window manufacturing, fabrication of door lites and solar panels, and sealing of metal roof…
UP-616 is a two-component, room-temperature-cured high performance polysulfide sealant. It also has excellent maneuverability, curing property and quality consistency.
Fonon Technology International, Inc. the world-renowned inventor and manufacturer of equipment based on Zero Width Laser Cutting Technology™ has announced the latest innovation in laser scribing for the flat panel display industry.
With its ByVention, Bystronic is presenting a laser cutting machine that is specifically designed to deal with the majority of parts manufactured in the market and makes no compromise for the occasional special jobs.
Kommerling UK, leading manufacturer and supplier of sealants and resins is launching a number of new products into the IG and glazing market.
A new hand vacuum suction cup which has flexible heads for handling curved glass windshields as well as flat glass windows is being introduced by Anver Corporation of Hudson, Massachusetts.
Macotec, important glass cutting table manufacturer will take part together its staff to the Glasstec Exhibition in Dusseldorf 24-28 October in Hall 16 Stand A 59 .On photo: Twin-CutNews and high technology will be a “must” for this Exhibition.
Big news at Maver Glass Machinery, established specialist in designing and producing Glass Cutting Tables and Automatic cutting lines for the industrial cut of the glass.
The FPS-50M3 is the largest capacity straight line vertical edger produced by SCHIATTI ANGELO Srl. This model which completes the FPS-50 series was designed to increase the performance of the older model FPS-50M2.
LOVATI will be present at Glasstec 2006, Dusseldorf: Hall 16, Booth No. D 40. The following machines will be displayed at LOVATI booth:- BEM 31: CNC machine particularly suitable for processing low-e glasses.
Our booth (F22 - Pavilion 16) at the Glasstec fair will be particularly rich in novelties and “curios” this year.
Inspired by the port The Law Courts, located on the southern edge of Antwerp, cover a surface area of 78,000 m² and features six levels: one underground and five above ground, the highest of which is just 15.75 m off the ground.
Polish automotive glass supplier has found that a high-accuracy water jet cutting machine at their has enabled it to cut-out any size or shape of area easily and economically.
Artist sheds light to reveal the alchemy of glass color, textureA passion for glass and color, nurtured from childhood, has evolved into a successful art glass lighting studio for Giuliana Dalsgaard of Novato.