Others also read
High-end specialized information and international elite sports - One fault per stockplate, two in every tenth jumbo: That’s the reality – aggravating and ex-pensive for glassworkers.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) celebrated 14 consecutive years of furthering the careers and education of students pursuing a degree related to the building products industry by awarding six AAMA scholarships to children…
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
Following the success of Carl F Groupco’s display at the inaugural FIT Show, the 2014 event will be the launch platform for a number of new products supplied by the established hardware distributor.
fensterbau/frontale, the International Trade Fair Window, Door and Facade, takes place in the Nuremberg exhibition centre from 26 - 29.
In keeping with the motto "be a part of IT," the German Mid-sized Companies Initiative selected the best software solutions in 41 categories.
Spring 2014 offers from March 26-29 one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
March 2014 will offer one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
GlassPrint 2013, Europe's only dedicated event for the decoration of glass, will take place in Düsseldorf, Germany 27th-28th November.
After a short time of installation, Benteler Maschinenbau GmbH completed successfully the commissioning of a mirror line for AGC in Spain, Sagunto.
The Aluminum Material Council (AMC) of the American Architectural Manufacturers Association (AAMA) has released a new white paper on aluminum’s sustainability, strength and efficiency entitled, "Aluminum: The Total Solution for Sustainable,…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
Software specialist FeneTech, creators of the world-renowned software solution FeneVision ERP will be present again at this year’s Vitrum show to be held in Milan, 23-26 October 2013.
At the workshop „Laser Processing of Glass Materials”, which will be held at the Laser Zentrum Hannover e.
During GlassBuild America, Sept.10-12, the American Architectural Manufacturers Association (AAMA) hosted an interactive game show that gave attendees the opportunity to win discounts on courses and exams from the association’s FenestrationMasters(…
As Europe’s leading event for the decoration of glass, the fifth GlassPrint conference and exhibition will return to Düsseldorf, Germany on 27-28 November 2013.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The American Architectural Manufacturers Association (AAMA) has released an updated standard that establishes minimum performance requirements for self adhering flashing surrounding exterior wall fenestration products.
At Glasstech Asia 2013 you will get an overview about Bystronic glass’ latest machinery for the manufacturing of insulating glass and laminated glass, handling equipment and for the pre-processing of automotive glass.