Others also read
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
Two new videos spotlight the customization and craftsmanship of Kolbe’s windows and doors, while amplifying the company’s “We’re for the visionaries” theme.
GlassCon Global is the first event of its kind in North America, which brings together global innovations in glass technology to further the development of the glass industry.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…
AAMA 520-12, Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors and Unit Skylights has been released by the American Architectural Manufacturers Association (AAMA).
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
Glazing Vision continue to supply rooflights across the globe, the latest being 3 No. Multipart Walk on Flushglaze rooflights 6000mm x 800mm for the PS1 project in New York.
A Polish producer of windscreens for the automotive aftermarket sector is entering the North American market.
SCHOTT Produces Chalcogenide Glass in the United States for the First Timel-r Gernot Weber, Product Manager for IR Materials, Scott Custer, Major General, US Air Force (Ret) and now head of SCHOTT Defense, Dr.
Duryea, PA--Schott North America announced the availability of chalcogenide glasses for infrared (IR) optical and fiber-optic components used in IR lasers and sensing applications from its Duryea, PA facility.
Schaumburg, Ill. -- The 2011 edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS "North American Fenestration Standard/Specification for windows, doors, and skylights" (NAFS-11) has received final approval and is now available.
(Reuters) - China on Friday issued a harsh rebuke of an anti-dumping complaint filed by U.S. solar firms, warning the United States not to take protectionist measures that could harm the global economy.