Others also read
Tim Doughty, Tubelite Inc.’s client development manager, has expanded his territory to serve glazing contractors and architectural teams in Alabama, Georgia and the Florida Panhandle.
Don't miss your opportunity to network with leaders in the field. Sign up now: http://facadesplus.com/. Facades+ is the leading conference on high performance and high design building skins.
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 312, “Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles.
Tubelite Inc. added Ty Bowie as a client development manager serving clients in central and northern Florida as part of G.
The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems, which provides a guide to manufacturers, architects, specifiers,…
HS Portal 300 lift and slide hardware is now available from Carl F Groupco. Manufactured by Siegenia, the product is an advanced fitting that supports increasing demand for high specification hardware.
Tubelite Inc. introduces 34000 Series storefront system as part of its ForceFront(TM) Storm products, engineered for hurricane resistance on low- to mid-rise commercial buildings.
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
Be a part of Zak World of Façades – an interactive seminar focused on showcasing the best technology and practices for the Indian façade industry.
The U.S. Department of Energy has announced it will provide up to $14 million to support technologies that contribute to advancing innovative energy-efficient solutions for buildings and homes. Read more below.
Wausau Window and Wall Systems(R) INvent(TM) -HP -XLT Series windows have received Florida’s Miami-Dade Count Notice of Acceptance (NOA), meeting the most stringent hurricane codes.
Tubelite introduces 34000 Series storefront system, engineered for hurricane resistance. This new product will be on display in booth #4634 at the American Institute of Architects (AIA) Convention and Expo 2014.
Confirmations and new responsibilities at the top management of Gimav during the general meeting held Monday June 16, 2014.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) celebrated 14 consecutive years of furthering the careers and education of students pursuing a degree related to the building products industry by awarding six AAMA scholarships to children…
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
Following the success of Carl F Groupco’s display at the inaugural FIT Show, the 2014 event will be the launch platform for a number of new products supplied by the established hardware distributor.
fensterbau/frontale, the International Trade Fair Window, Door and Facade, takes place in the Nuremberg exhibition centre from 26 - 29.
Spring 2014 offers from March 26-29 one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.
March 2014 will offer one of the world’s leading trade shows for the glass and glazing industry: fensterbau/frontale in Nuremberg, Germany.