I want to put out trademark on the surface of a laminated glass before put it insede the autoclave. Do you know some kind of painting that can do this? Do you do something similar?
Reply to [B]Vetro[/B]:
> I want to put out trademark on the surface of a laminated glass before put it insede the autoclave. Do you know some kind of painting that can do this? Do you do something similar?
We can supply to portable machines: one marks with sand(or better corundum) until a diameter of 18 mm., the second until a diameter of 80 mm..
They work on vertical glass, but with a suction pump they can work in every positions.
We can supply also a table machine that works orizzontally and a table machine that can work in every position and automatically.
neostucco@tin.it
Reply to [B]Vetro[/B]:
> I want to put out trademark on the surface of a laminated glass before put it insede the autoclave. Do you know some kind of painting that can do this? Do you do something similar?
Instead of paint you can use sandblasting marking machine.
neostucco@tin.it has several.
For this process a special machine is used, called sand jet marking machine. Using a sandblasting process it permanently place a identifying mark on the glass surface. Generally this marks are to be located in one of the corners of the glazing surface. This machine is produced by Fratelli Pezza. Here is a link to this machine http://www.fratelli-pezza.com/ing/prodotti/marker101.htm