Others also read
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
Pneumofore feels comfortable with 'modern sustainability criteria' being found more and more frequently in the global hollow glass community. It is proven since decades that the best IS machine performance is achieved with the precise…
Audi Hoffman Estates dealership in Illinois showcases Tubelite’s 400 Series curtainwall and reflects the efficiency, performance, luxury and environmental themes of its vehicles.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
After being honored five years in a row as an award finalist, Wausau Window and Wall Systems has been selected as one of only 13 winners in the state of the prestigious, 20th annual Wisconsin Corporate Safety Award.
Kolbe & Kolbe Millwork Co., Inc. promoted Keith Koenig to vice president of manufacturing and added him as the newest member of the company’s executive leadership team.
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
High-contrast and UV light resistant markers are now also be used on hollow and curved glass. High product quality and absolute process reliability - these are characteristics of boraident laser marking systems.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
Despite the apparent severity of the early, and not easily interpreted, statistical data, 2013 seems to be ending positively for Italy's manufacturers of hollow glass; and the forecast for 2014 is also quite rosy.
Italian exports in the glass sector continue to grow; most recently, thanks to companies in the field of flat glass.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
GlassPrint 2013, Europe's only dedicated event for the decoration of glass, will take place in Düsseldorf, Germany 27th-28th November.
After a short time of installation, Benteler Maschinenbau GmbH completed successfully the commissioning of a mirror line for AGC in Spain, Sagunto.
Glazing Vision would like to congratulate our own Gary Hearn, Gary, Glazing Vision’s Quality Manager, has passed the examination requirement set by IRCA (International Register of Certificated Auditors), a division of the Chartered Quality Institute.
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
CONDAT will display on next Glasstech Asia Show in Kuala Lumpur its wide range of lubricants for glass industry (Hollow glass and Flat glass).
At the workshop „Laser Processing of Glass Materials”, which will be held at the Laser Zentrum Hannover e.
As Europe’s leading event for the decoration of glass, the fifth GlassPrint conference and exhibition will return to Düsseldorf, Germany on 27-28 November 2013.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
Industry data processed by Gimav in its annual Industry Report paint a very clear picture of the brilliant condition Italy's glass processing machine building industry is enjoying.
The 1st Joint Meeting of DGG – ACerS GOMD takes place in Aachen, Germany May 25 – 30, 2014 and includes the 88th Annual Meeting of German Society of Glass Technology (DGG) and the Glass & Optical Materials Division Annual Meeting (ACerS GOMD) …