Others also read
Tubelite Inc. announces Tim Fookes as its director of engineering. As part of the company’s Leadership Group, he will ensure that the engineering department provides excellent customer service and assistance for both new and existing storefront,…
They may have replaced the textile mills and become a symbol of Mumbai's vertical growth, but the glitzy high-rises with glass facades in the city have attained the dubious distinction of turning into deathtraps during fires.
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 312, “Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles.
The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems, which provides a guide to manufacturers, architects, specifiers,…
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Members of AAMA’s Glass Material Council (GMC) Marketing Committee and Insulating Glass Manufacturers Alliance's (IGMA) Visual Quality Task Group are developing a consumer guide for homeowners which will explain allowable glass obstructions…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).