Others also read
AAMA 505-09, a test procedure, and QAG-1-09, a quality assurance processing and monitoring guide, have been released by the American Architectural Manufacturers Association (AAMA).
A Pilkington Automotive Poland competition for the best PNCA project has awarded prizes to four of the plant's 30 PNCA teams. The competition covered three categories - the most active team, the most active area and the most valuable solution.
DuPont Microcircuit Materials (MCM) recently announced the introduction of DuPont™ Solamet® PV412 photovoltaic (PV) metallization paste for thin film PV technologies.
DuPont and Applied Materials, Inc., are collaborating to advance multiple printing technology expected to increase the absolute efficiency of crystalline silicon (c-Si) photovoltaic (PV) solar cells.
PVB is increasingly assuming the leading role among alternative encapsulation materials for solar cells as the alternatives to Ethylene-Vinyl-Acetate (EVA) Reliable and long-term protection of solar cells from external influences is a must for solar…
Optimized sputtering processes significantly contribute to the efficient production of solar cells. Maximum material utilization, faster processes and top quality are key success factors for this industry.
The NSG Group announced consolidated business results for the first quarter of FY 2010 (from 1 April 2009 to 30 June 2009) on 10 August.
Scheuten Solar announces the start for the supply of Scheuten Multisol® modules for a 1 MWp project in Greece. Owner and operator of the project will be Ilioependytiki S.A., whereas Data Energy will undertake the installation of almost 6,000…
As part of its development strategy for solar energy, Saint-Gobain is acquiring Shell's share of Avancis, a joint venture between the two companies. Avancis has developed highly competitive technology for thin-film CIS (Copper, Indium and…
France’s state-owned utility is partnering with an American solar panel manufacturer to build a 90 million euro ($128 million) solar manufacturing plant that would be the largest in France, the two announced on Thursday.
You may have read the news about the DuPont™ PV5300 and PV5200 Series of photovoltaic (PV) encapsulant sheets.
On July 10, 2009, Chief Executive Officer Pierre-André de Chalendar inaugurated in the presence of José Socrates, Portugal's Prime Minister and Fernando Texeira dos Santos, Minister of Economy and Innovation, Saint-Gobain’s first and largest…
University of New South Wales' ARC Photovoltaic Centre of Excellence has created the first silicon solar cell to achieve the milestone of 25 per cent efficiency.
Poly 225 module to be first photovoltaic module manufactured in Albuquerque SCHOTT Solar announced today that it will unveil a new 225 watt polycrystalline photovoltaic module at the Solar Power International show in San Diego, California.
To meet the increasing demand of its Indian customers, Saint-Gobain has announced plans to build a new flat glass plant in this country.
Taiwan Glass Industrial (TGI) plans to invest an additional NT$2 billion (US$62.7 million) in the next three years in its plant in Changpin Industrial Park in central Taiwan to produce glass products for the solar cell industry, according to data…
- Nearly 80 percent say the U.S. Government should give the development and expansion of renewable energy higher priority - Results send clear signal for American legislation According to the findings of the SCHOTT Solar Barometer, a…
To meet the increasing demand of its Indian customers, Saint-Gobain has announced plans to build a new flat glass plant in this country.
Global Solar Energy Introduces First Thin-Film Alternative for Silicon Module and BIPV Manufacturing
New PowerFlex Solar Strings Simplify and Speed Adoption of Low-Cost, Highly-Efficient and Flexible Thin-Film CIGS Technology
To meet the needs of the fast-growing photovoltaic (PV) solar energy market, DuPont on June 9, 2008 announced that it will expand production of DuPont™ Solamet® thick film metallization pastes at its Electronic Materials DuPont Dongguan Ltd. (EMDD)…
Photo: Professor John Bell. (Credit: Image courtesy of Queensland University of Technology) People could live in glass houses and look at the world through rose-tinted windows while reducing their carbon emissions by 50%, thanks to QUT Institute of…
SCHAUMBURG, Ill. – AAMA 506-08, a voluntary specification for impact and cycle testing, has been released by the American Architectural Manufacturers Association (AAMA).
by Staff Writers Octillion has announced efforts to streamline the deposition of silicon nanoparticles on to glass, an important process in development of the Company's NanoPower Window technology, a novel transparent window capable of…
Applied Materials, Inc. today announced it was named Green Energy Innovator of the Year for its pioneering work on the Applied SunFab™ Thin Film Line, at a gala presenting the prestigious 9th Annual Platts Global Energy Awards.
People from Austria enjoy living in harmony with nature, particularly those who live in the region known as Styria, the green heart of the alpine republic.