Others also read
The American Architectural Manufacturers Association (AAMA) has released an updated document establishing performance requirements for fiber reinforced thermoset profiles for use in fenestration products.
* Valspar is exhibiting in AIA booth #3717/Learning Lounge 3625LL *The Valspar Corporation celebrates 50 years of Fluropon® 70 percent PVDF resin-based coatings.
On April 1, 2016 on the territory of the Russian Federation introduced for voluntary use by a number of international standards for glass construction, technical and household purposes.
J.E. Berkowitz, LP (JEB), a premier architectural glass fabricator based in Pedricktown, New Jersey, will exhibit its new JEB 3SEAL insulating glass spacer system and debut a new video highlighting its expanded glass fabrication capabilities at the…
Speakers cover installation, European market, color measurement, more at AAMA 78th Annual Conference
The American Architectural Manufacturers Association (AAMA) heard speakers on a range of topics at the 78th Annual Conference held Feb. 15-18 in Ft.
Tubelite Inc. announces Tim Fookes as its director of engineering. As part of the company’s Leadership Group, he will ensure that the engineering department provides excellent customer service and assistance for both new and existing storefront,…
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 312, “Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles.
The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems, which provides a guide to manufacturers, architects, specifiers,…
The North Carolina Rules Review Commission has rejected the temporary rule, which allowed permit holders to opt-out of using low-e fenestration products in residential construction.
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
NSF International, an independent global organization that writes standards, and tests and certifies products for the commercial furnishing, construction, food, water and consumer goods industries, in collaboration with the Glass Association of…
Registration is now open for the 2014 GlassCon Global Conference. The conference, taking place at the Philadelphia Convention center from July 7-10, is dedicated to driving innovation in glass technology.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
PCRs provide necessary guidance for creating life cycle assessments and the resulting reports, environmental product declarations (EPDs) NSF International, an independent global organization that writes standards, and tests and certifies products…
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
Tubelite Inc. has appointed Glen Barfknecht to the position of vice president of operations. Based at the company’s headquarters in Grand Rapids, Mich., he is part of the executive team and reports to Tubelite’s president, Ken Werbowy.