Others also read
The US is experiencing an especially lively market scenario, proving once again it is a powerful driver of the global economy.
The forthcoming edition of Vitrum will have a special attraction factor in that it will run concurrent with Expo 2015.
Helping simplify the process of choosing windows and doors that contribute to quiet, comfortable interiors, Kolbe has more than doubled the number of its products tested for Sound Transmission Class (STC) and Outdoor-Indoor Transmission Class (OITC…
Coinciding with the fulfillment of the ARTESUN project´s first year (November), the third Project Meeting took place at Corning headquarters in Avon, France Funded by the European Comission through its Seventh Framework Programme, ARTESUN…
The photovoltaic Low-e glass of Onyx Solar will transform the new terminal at this modern airport, one of the largest in South America, in a building that generates its own energy from the sun.
Don't miss your opportunity to network with leaders in the field. Sign up now: http://facadesplus.com/. Facades+ is the leading conference on high performance and high design building skins.
Clare Crockett has been promoted to Marketing Manager at Carl F Groupco. She moves from the position of Marketing Executive.
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
Renovation projects have surged in popularity over the last couple of years for frameXpress, as sales figures have repeatedly risen in respect of this market sector at the company.
The American Architectural Manufacturers Association (AAMA) is set to release AAMA 103-14a, Procedural Guide for Certification of Window, Door and Skylight Assemblies, on Dec. 1, 2014. This document has been completely re-written and re-formatted…
Two beautifully designed £1.2 million family homes in the South Hertfordshire village of Cuffley were recently finished using a variety of products from the frameXpress range.
For the second year in a row, leading UK warm edge spacer bar and insulated glass component manufacturer, Thermoseal Group has again been selected as finalists for Component Supplier of the Year in the G14 Awards.
The North Carolina Rules Review Commission has rejected the temporary rule, which allowed permit holders to opt-out of using low-e fenestration products in residential construction.
Renovation projects have surged in popularity over the last couple of years for frameXpress, as sales figures have repeatedly risen in respect of this market sector at the company.
Michael Hodgson, ConSol founder, spoke at the American Architectural Manufacturers Association (AAMA) 2014 Fall Conference during a Sept. 16 general session.
Six people from Carl F Groupco braved the elements outside their Peterborough distribution centre to take part in a team ice bucket challenge.
The American Architectural Manufacturers Association (AAMA) has released AAMA 663-14, “Voluntary Specification for In-Process Quality Control Requirements for Applicators of Organic Coatings to Polyvinyl Chloride (PVC) Exterior Profiles," which…
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The addition of MACO door locks to Carl F Groupco’s range of window and door hardware builds on a twenty year relationship between the manufacturer and hardware distributor.
Lori Schock has been named Wausau Window and Wall Systems’ vice president of sales and marketing. As a member of Wausau’s executive team, Schock reports directly to company president Jim Waldron.
Wausau Window and Wall Systems expanded architectural sales representative, Bob Thiede’s sales region to include southern California, Nevada and Hawaii, as well as Wyoming, Montana and portions of Idaho, South Dakota and North Dakota.
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
Latest hardware to be added to Carl F Groupco’s range is manufactured by Siegenia and designed specifically for aluminium windows.
The U.S. Department of Energy has announced it will provide up to $14 million to support technologies that contribute to advancing innovative energy-efficient solutions for buildings and homes. Read more below.
Wausau Window and Wall Systems(R) INvent(TM) -HP -XLT Series windows have received Florida’s Miami-Dade Count Notice of Acceptance (NOA), meeting the most stringent hurricane codes.