Others also read
With the arrival of CE marking of IGUs (EN1279) on March 1st, it has been agreed that thermally insulating glass units should now state U-values with 90% argon-gas filling.
Thermoseal Group, the UK’s supplier of the Thermix TX.N warm edge spacer bar and a supplier of double glazing machinery and consumables, has achieved record first quarter sales of TX.N warm edge spacer bar.
When purchasing Harvey replacement windows there are many different options for energy efficiency. As most people know, you get better performance from insulated glass than from single pane windows.
On the 28th of February, 2007 the Seitenstetten based Lisec Maschinenbau GmbH received the much in demand nationwide innovation-award of the Republic of Austria for its revolutionary glass tempering technology.
The Glassex 2007 Energy Efficiency Zone at the NEC in Birmingham proved to be an ideal platform for Thermoseal Group to address window manufacturers and sealed unit producers with its comprehensive range of double glazing consumables.
Double glazing firm St Helens Glass is believed to have collapsed with the loss of more than 200 jobs. It is estimated that figure could rise to more than 300 if salespeople, fitters and drivers contracted by the firm are also taken into account.
Guardian Building Products Distribution, Inc., announces its newest product with the introduction of GuardWrap™.
Saint-Gobain Isover is to build a new, 70,000-ton capacity glass wool plant in Chemillé, (Maine-et-Loire) France. The plant is due to begin production at the end of 2008, will create approximately 150 jobs.
In the context of CE Marking, most flat glass products sold in the European Union must now conform to European technical standards known as harmonised European Norms (hEN), as dictated by the Comité Européen de Normalisation (CEN).
The Raytek GS110 process imaging system for low emissivity (low-E) glass was specifically designed to monitor one-side coated flat glass and addresses a rapidly increasing need as low-E glass becomes more widely used in the construction industry.
Receiving the Insulating Glass Certification Council's highest certification for its Comfort-Gard Plus(R) glass technology, Patio Enclosures, Inc. has become the only sunroom manufacturer to attain this distinction for the commercial and…
With proper, detailed planning, a new conservatory can add value to your property and enhance your living accommodation.
Hot Melt Technologies introduced the Benchmark 615 Hot Melt system that can be used with high-viscosity butyls, sealants and mastics for insulating glass window manufacturing, fabrication of door lites and solar panels, and sealing of metal roof…
UP-616 is a two-component, room-temperature-cured high performance polysulfide sealant. It also has excellent maneuverability, curing property and quality consistency.
Kommerling UK, leading manufacturer and supplier of sealants and resins is launching a number of new products into the IG and glazing market.
Düsseldorf 1996-2006: 10 years have passed since the first Vertical Cutting Line for Stratified Glass Panes was exhibited to the world; at the time, it was welcomed with amazement and surprise and it was immediately noticed by the best glassworks,…
Inspired by the port The Law Courts, located on the southern edge of Antwerp, cover a surface area of 78,000 m² and features six levels: one underground and five above ground, the highest of which is just 15.75 m off the ground.
Lisec, the world's largest manufacturer of high-tech insulating glass and machines for photovoltaic is establishing a research, development and manufacturing facility at its new headquarters at the Dubai Silicon Oasis (DSO).
DuPont Glass Laminating Solutions has introduced DuPont Spallshield® , the business' first generation plastic composite product for use in vehicle sunroofs.
Improved thermal insulation, lower total energy transmittance, and better handling: Interpane revealed optimized glass technology at the fensterbau.
The first "Architektur Fenster Fassade" innovation prize has been awarded at the fensterbau/frontale 2006 in Nuremberg by the architecture journals xia IntelligenteArchitektur and AIT in cooperation with NürnbergMesse GmbH.
Diamon-Fusion International, Inc. (DFI), global developer and exclusive supplier of the Diamon-Fusion® patented nanotechnology, is proud to announce that ALCOA has been the recipient of The Best of 05 by the USGlass Magazine 2005 Product of the…
On March 27, 2006, H.B. Fuller Company (NYSE:FUL) announced that it has entered into an asset purchase agreement with Henkel KGaA under which H.B.
H.B. Fuller Co. stated that it reached asset purchase deal with Henkel KgaA, wherein the former company would buy the insulating glass sealant business of the latter company.
After only a six month construction phase Bystronic-Lenhardt Technology has has officially opened a new Training Centre in the southern German town of Neuhausen-Hamberg.