Others also read
The American Architectural Manufacturers Association (AAMA) has published an updated standard for acoustical performance.
The American Architectural Manufacturers Association (AAMA) has published two updated standards for rigid thermoplastic cellulosic composite profiles.
Despite the apparent severity of the early, and not easily interpreted, statistical data, 2013 seems to be ending positively for Italy's manufacturers of hollow glass; and the forecast for 2014 is also quite rosy.
Italian exports in the glass sector continue to grow; most recently, thanks to companies in the field of flat glass.
The American Architectural Manufacturers Association (AAMA) published a standard practice for the installation of exterior doors into residential and light commercial buildings of not more than three stories above grade in height, with surface…
GlassPrint 2013, Europe's only dedicated event for the decoration of glass, will take place in Düsseldorf, Germany 27th-28th November.
After a short time of installation, Benteler Maschinenbau GmbH completed successfully the commissioning of a mirror line for AGC in Spain, Sagunto.
Glazing Vision would like to congratulate our own Gary Hearn, Gary, Glazing Vision’s Quality Manager, has passed the examination requirement set by IRCA (International Register of Certificated Auditors), a division of the Chartered Quality Institute.
Kevin Zuege of Quanex Building Products was the first person to successfully complete the American Architectural Manufacturers Association’s (AAMA) FenestrationMasters(™) program, earning the FenestrationMaster(™) professional certification.
CONDAT will display on next Glasstech Asia Show in Kuala Lumpur its wide range of lubricants for glass industry (Hollow glass and Flat glass).
At the workshop „Laser Processing of Glass Materials”, which will be held at the Laser Zentrum Hannover e.
As Europe’s leading event for the decoration of glass, the fifth GlassPrint conference and exhibition will return to Düsseldorf, Germany on 27-28 November 2013.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
Industry data processed by Gimav in its annual Industry Report paint a very clear picture of the brilliant condition Italy's glass processing machine building industry is enjoying.
The 1st Joint Meeting of DGG – ACerS GOMD takes place in Aachen, Germany May 25 – 30, 2014 and includes the 88th Annual Meeting of German Society of Glass Technology (DGG) and the Glass & Optical Materials Division Annual Meeting (ACerS GOMD) …
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
Glassman America 2013, the leading event for the hollow and container glass industry will take place at the Flamingo Hotel, Las Vegas, USA during 11 & 12 September 2013.
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
New Manufacturing market report from Euromonitor International: "Glass and Glass Products in Germany: Industrial Report". Euromonitor International's Industrial reports provide a 360 degree view of an industry.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…