Others also read
Thermobar Warm Edge Spacer, manufactured by Thermoseal Group, is officially at the top of the list of the most thermally efficient spacer systems as per figures published on the new Bundesverband Flachglas (BF) Data Sheet – 0.14W/mK.
Renovation projects have surged in popularity over the last couple of years for frameXpress, as sales figures have repeatedly risen in respect of this market sector at the company.
The American Architectural Manufacturers Association (AAMA) is set to release AAMA 103-14a, Procedural Guide for Certification of Window, Door and Skylight Assemblies, on Dec. 1, 2014. This document has been completely re-written and re-formatted…
Lindes, with their modern facility based in Tlatilco close to Mexico City, is the leading Mexican company for fabrication and distribution of insulating glass.
UK warm edge spacer bar and accessories manufacturer, Thermoseal Group, reports a huge success at the Glasstec Exhibition, Messe Düsseldorf 21-24 October 2014 – both in terms of sales leads from enquiries at the show, and also in attendance to its…
External condensation is a common problem associated with highly efficient Insulating Glass Units (IGUs).
Two beautifully designed £1.2 million family homes in the South Hertfordshire village of Cuffley were recently finished using a variety of products from the frameXpress range.
For the second year in a row, leading UK warm edge spacer bar and insulated glass component manufacturer, Thermoseal Group has again been selected as finalists for Component Supplier of the Year in the G14 Awards.
The North Carolina Rules Review Commission has rejected the temporary rule, which allowed permit holders to opt-out of using low-e fenestration products in residential construction.
Replacing your windows doesn’t have to be a costly exercise. If your property’s PVCu, timber or aluminium frames are in good condition, there’s no need to replace them – simply upgrade the insulating glass unit.
Renovation projects have surged in popularity over the last couple of years for frameXpress, as sales figures have repeatedly risen in respect of this market sector at the company.
Michael Hodgson, ConSol founder, spoke at the American Architectural Manufacturers Association (AAMA) 2014 Fall Conference during a Sept. 16 general session.
HS Portal 300 lift and slide hardware is now available from Carl F Groupco. Manufactured by Siegenia, the product is an advanced fitting that supports increasing demand for high specification hardware.
We have been granted the certificate issued by American organisation IGCC/IGMA, which confirms high quality and durability of our glass.
Six people from Carl F Groupco braved the elements outside their Peterborough distribution centre to take part in a team ice bucket challenge.
The American Architectural Manufacturers Association (AAMA) has released AAMA 663-14, “Voluntary Specification for In-Process Quality Control Requirements for Applicators of Organic Coatings to Polyvinyl Chloride (PVC) Exterior Profiles," which…
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The addition of MACO door locks to Carl F Groupco’s range of window and door hardware builds on a twenty year relationship between the manufacturer and hardware distributor.
Lori Schock has been named Wausau Window and Wall Systems’ vice president of sales and marketing. As a member of Wausau’s executive team, Schock reports directly to company president Jim Waldron.
Wausau Window and Wall Systems expanded architectural sales representative, Bob Thiede’s sales region to include southern California, Nevada and Hawaii, as well as Wyoming, Montana and portions of Idaho, South Dakota and North Dakota.
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
Latest hardware to be added to Carl F Groupco’s range is manufactured by Siegenia and designed specifically for aluminium windows.
Allford Hall Monaghan Morris (AHMM) specified AluK curtain walling and window systems for the Burntwood School project, a series of new educational buildings which will serve up to 2000 pupils and over 200 staff.