Others also read
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
Renovation projects have surged in popularity over the last couple of years for frameXpress, as sales figures have repeatedly risen in respect of this market sector at the company.
The American Architectural Manufacturers Association (AAMA) is set to release AAMA 103-14a, Procedural Guide for Certification of Window, Door and Skylight Assemblies, on Dec. 1, 2014. This document has been completely re-written and re-formatted…
Two beautifully designed £1.2 million family homes in the South Hertfordshire village of Cuffley were recently finished using a variety of products from the frameXpress range.
For the second year in a row, leading UK warm edge spacer bar and insulated glass component manufacturer, Thermoseal Group has again been selected as finalists for Component Supplier of the Year in the G14 Awards.
The North Carolina Rules Review Commission has rejected the temporary rule, which allowed permit holders to opt-out of using low-e fenestration products in residential construction.
Renovation projects have surged in popularity over the last couple of years for frameXpress, as sales figures have repeatedly risen in respect of this market sector at the company.
Michael Hodgson, ConSol founder, spoke at the American Architectural Manufacturers Association (AAMA) 2014 Fall Conference during a Sept. 16 general session.
HS Portal 300 lift and slide hardware is now available from Carl F Groupco. Manufactured by Siegenia, the product is an advanced fitting that supports increasing demand for high specification hardware.
Six people from Carl F Groupco braved the elements outside their Peterborough distribution centre to take part in a team ice bucket challenge.
The American Architectural Manufacturers Association (AAMA) has released AAMA 663-14, “Voluntary Specification for In-Process Quality Control Requirements for Applicators of Organic Coatings to Polyvinyl Chloride (PVC) Exterior Profiles," which…
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The addition of MACO door locks to Carl F Groupco’s range of window and door hardware builds on a twenty year relationship between the manufacturer and hardware distributor.
Lori Schock has been named Wausau Window and Wall Systems’ vice president of sales and marketing. As a member of Wausau’s executive team, Schock reports directly to company president Jim Waldron.
Wausau Window and Wall Systems expanded architectural sales representative, Bob Thiede’s sales region to include southern California, Nevada and Hawaii, as well as Wyoming, Montana and portions of Idaho, South Dakota and North Dakota.
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
Latest hardware to be added to Carl F Groupco’s range is manufactured by Siegenia and designed specifically for aluminium windows.
Investment in new despatch facilities at Carl F Groupco supports the hardware supplier’s commitment to service.
Wausau Window and Wall Systems(R) INvent(TM) -HP -XLT Series windows have received Florida’s Miami-Dade Count Notice of Acceptance (NOA), meeting the most stringent hurricane codes.
Method to demonstrate products’ operational capability Schaumburg, Illinois -- The American Architectural Manufacturers Association (AAMA) has published AAMA 513-14, a document that sets a standard laboratory test method for windows and doors to…
Wausau Window and Wall Systems(R) showcases its product line of historically accurate windows during the American Institute of Architects (AIA) Expo and Convention 2104.
In partnership with PN, Carl F Groupco has developed reversible gearing for the new Eurocell Modus PVC system.
GlassBuild America features exhibitors from all over the world offering a wide variety of products and services for the Glass, Window, and Door industry.
Walker, Michigan -- Tubelite Inc. announces Jim Flandreau as director of information technology (IT) business relationship management.
The American Architectural Manufacturers Association (AAMA) celebrated 14 consecutive years of furthering the careers and education of students pursuing a degree related to the building products industry by awarding six AAMA scholarships to children…