Others also read
As Europe’s leading event for the decoration of glass, the fifth GlassPrint conference and exhibition will return to Düsseldorf, Germany on 27-28 November 2013.
In this month of September, SGE will exhibit and conduct seminars at the two most important shows in America. Come and join us in America. From September 10th to September 12th, come join us in Atlanta, GA at Booth 349 at Glass Build America.
The American Architectural Manufacturers Association (AAMA) has released AAMA 643-13, "Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes," which describes the test procedures and…
Mark Silverberg, president of Technoform North America, Inc., will present at upcoming glazing industry events for the National Glass Association (NGA) and Glass Association of North America (GANA).
The American Architectural Manufacturers Association (AAMA) released AAMA 912-13, Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM), which identifies and outlines minimum requirements for two widely used…
The fourth edition of INGLASS International Architecture Conference will take place in Warsaw on November 27, 2013.
At Glasstech Asia 2013 you will get an overview about Bystronic glass’ latest machinery for the manufacturing of insulating glass and laminated glass, handling equipment and for the pre-processing of automotive glass.
All exhibition stands at the Glassman America 2013 show on 11th - 12th September in Las Vegas, USA have sold out! Exhibition organiser Quartz Business Media said all 71 stands have now been sold, almost two months before the event is due to…
Stephen Gold, president and CEO of Manufacturers Alliance for Productivity and Innovation (MAPI), delivered a keynote presentation on the recovery of the U.
The American Architectural Manufacturers Association (AAMA) recently published a document that recommends static water penetration resistance test pressures for non-hurricane-prone U.
Demonstrating its ongoing support for the American Institute of Architects (AIA), Kolbe proudly sponsors the Custom Residential Architects Network (CRAN) and the Historic Resources Committee (HRC).
AAMA assembles 50 backpacks for Chicago children to commemorate certification anniversary. The American Architectural Manufacturers Association (AAMA) recently participated in a day of service at World Vision in Chicago to commemorate the…
The American Architectural Manufacturers Association (AAMA) announced the release of an interim procedural guide that will provide a documented, optional process to extend current, unexpired AAMA product certification to any edition of AAMA/WDMA(/…
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
The Western Region of the American Architectural Manufacturers Association (AAMA) will host its Spring Summit, April 30-May 1, at the Tempe Mission Palms Hotel in Tempe, Ariz.
The American Architectural Manufacturers Association (AAMA) announced the launch of its Facebook page for the AAMA Scholarship Program and Partner Program.
Mike Salsieder, president and general counsel of Kolbe & Kolbe Millwork Company, Inc., was elected by the Window and Door Manufacturers Association (WDMA) board of directors to serve a the national association’s 2013-14 chair.
The American Architectural Manufacturers Association (AAMA) recently released an updated standard for the installation of residential replacement windows without the removal of existing frames.
Twelve members of the American Architectural Manufacturing Association (AAMA) sponsored 340 World Vision SchoolTools backpacks, at a total cost of $7,480, to benefit at-risk children in Navajo Nation.
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 76th Annual Conference Awards Banquet held in Tucson, Ariz.
AAMA 903-12, "Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side-Hinged Doors" was recently released by the American Architectural Manufacturers Association (AAMA).
AAMA Releases Test Method for Operating Forces of CW and AW Class Windows, Sliding and Terrace Doors
AAMA 513-12, Standard Laboratory Test Method for Determination of Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces was recently released by the…
AAMA 520-12, Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors and Unit Skylights has been released by the American Architectural Manufacturers Association (AAMA).
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
We invite you to take part in the International Scientific Conference "Glass and Modern Technology XXI" to be held in Moscow on 27 and 28 November 2012 in the framework of the specialized exhibition "GlassExpo-2011", in the…