Others also read
GGR’s versatile below-the-hook vacuum lifters can be fitted with specialist vacuum pads for safely handling different types of textured and coated glass units.
Glass Technology Services Ltd (GTS) has joined manufacturers, designers and suppliers to conduct pioneering research and development in 3D printing technology – successfully winning major funding.
Tecnoglass, Inc. (NASDAQ:TGLS; OTCBB:TGLSW) ("Tecnoglass" or the "Company") today announced that it acquired selected assets of Glasswall, LLC, a Miami, Florida-based manufacturer of impact-resistant windows and door systems…
National Windscreens, the UK’s largest independently owned windscreen repair and replacement specialist, has issued some expert advice to help motorists keep their windscreens in tip top condition throughout the current cold snap.
Welcome to the January issue of Glass International. This issue features a host of exclusives with some of the biggest names in the industry.
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications." Last updated in 2009, the document describes methods of test, procedures…
The American Architectural Manufacturers Association (AAMA) has updated and released AAMA 312, “Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles.
The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems, which provides a guide to manufacturers, architects, specifiers,…
Folienwerk Wolfen, the high quality plastic film provider for PET, PC and PLA bases with a 20 year heritage is pleased to announce a partnership with RegaLead to supply its pioneering evguard® series of lamination films to the UK glass processing…
Two beautifully designed £1.2 million family homes in the South Hertfordshire village of Cuffley were recently finished using a variety of products from the frameXpress range.
The North Carolina Rules Review Commission has rejected the temporary rule, which allowed permit holders to opt-out of using low-e fenestration products in residential construction.
HS Portal 300 lift and slide hardware is now available from Carl F Groupco. Manufactured by Siegenia, the product is an advanced fitting that supports increasing demand for high specification hardware.
The American Architectural Manufacturers Association (AAMA) announces new staff appointments, which include Jason Seals as certification manager and Rich Rinka as technical/industry affairs manager. * Jason Seals, Certification Manager * Seals…
The American Architectural Manufacturers Association (AAMA) has released AAMA TIR-15-14, “Overview of Design Wind Load Determination for Fenestration Systems.
The Group’s Managing Director, Gwain Paterson comments: “Sponsoring the G-Awards champagne reception is our contribution to what has always been a great evening." “We were one of the earliest sponsors of the event and enjoy seeing its…
The American Architectural Manufacturers Association (AAMA) has released AAMA 902-14, “Voluntary Specification for Sash Balances.” This document establishes the requirements for the materials, testing and performance for sash balances used in hung-…
The American Architectural Manufacturers Association’s (AAMA's) current standards pertaining to fenestration in manufactured housing have been recommended for adoption by the Manufactured Housing Consensus Committee (MHCC) to the U.S.
The Society of Glass Technology’s Annual Conference will this year be held at the University of Durham, UK, on 10th-12th September.
IQ Glass - Sliding Doors meeting Glass FloorAs the UK’s leading architectural glazing company IQ Glass are often the first to see any emerging trends in residential architecture including materials used, building methods and design aspects.
Aluminium façade specialist, Wicona, has released Building Information Modelling (BIM) components for its curtain walling, window and door systems, which are now available to download from the BIMstore.
The American Architectural Manufacturers Association (AAMA) has published AAMA 1607, “Voluntary Installation Guidelines for Unit Skylights." This document provides a guideline for installing pre-assembled unit skylights onto a roof.
The American Architectural Manufacturers Association (AAMA) celebrated 14 consecutive years of furthering the careers and education of students pursuing a degree related to the building products industry by awarding six AAMA scholarships to children…
The American Architectural Manufacturers Association (AAMA) board of directors voted unanimously to establish a sustainability steering committee.
The American Architectural Manufacturers Association (AAMA) has published an updated standard for flashing.
Following the success of Carl F Groupco’s display at the inaugural FIT Show, the 2014 event will be the launch platform for a number of new products supplied by the established hardware distributor.